The Maxquarium 000 PPM reverse osmosis + de-ionization system produces up to 500 liters per day (up to 20 liters per hour), designed for use in aquariums, aquaponics and hydroponics and for all those growers who want to start with 000 ppm water.

It eliminates up to 95% of salts, heavy metals and other possible contaminants. Removes up to 99% of chlorine and reduces sediment larger than 5 microns instantly.

To achieve optimal water production conditions, you can use Ref#422113.

Maxquarium 000 PPM Benefits

Reverse Osmosis Equipment is designed to minimize water waste to the drain, with a ratio of approximately 2:1 (bad water/good water).

• Eliminates up to 95% of salts in water
• Less water waste than other equipment
• Easy installation indoors and outdoors

Helps stabilize pH, achieves 100% effectiveness of nutrients and fertilizers, and protects organisms. Ideal for organic crops.

Eliminates and/or reduces: salts, heavy metals, chloramines, nitrates, nitrites, chlorine, sediments, soil, oxides, herbicides and pesticides, volatile organic pollutants (chemical contaminants, benzene, oils, trihalomethanes, detergents, PCBs)

How many liters per hour are filtered with the Maxquarium 000 PPM?

The Maxquarium 000 PPM offers 20 liters per hour, which means 500 liters per day. It is practically distilled water that allows plants to absorb nutrients more easily and generate better production.

Suitable conditions for using the Maxquarium 000 PPM

To ensure optimal operation of this Maxquarium 000 PPM osmosis filter, a water pressure of 4 BAR is required. It is interesting to have a pressure pump, with which you will also be able to reduce the waste of water in the drain.

Water conditions

• Temperature 25ºC
• Pressure: Minimum 3 Kg – Maximum 6kg
• Quality (500 tds or ppm)

Other conditions can reduce water production.

Filter changes must be made every 4,000 liters of osmosis water produced.

Ref#422113 and its spare parts to add to any reverse osmosis equipment when ultra pure water of 000 ppm is required.

Use with Pump Kit

To get the most out of osmosis, it is recommended to use a Pump Kit, so that the pressure is maintained and you get the performance indicated by the manufacturer. These kits must be placed at the water inlet of the osmosis.

• Ref#422113

For better performance you can also use a Buoy Kit, so that it sends a signal to the pump when it should stop working when the water reaches a certain level. In this way, spills or excessive watering are avoided.

• Ref#422114

Spare parts

It is recommended to change the filters every 4,000 liters of osmosis water produced. To configure your Maxquarium 000 PPM osmosis you need:

• 1x Ref#422109
• 1x RefC#422102
• 1x RefC#422106