Mega Grow 1000 L Reverse Osmosis System

The Mega Grow reverse osmosis system produces up to 1000 liters per day (up to 40 liters per hour), ideal for medium-sized crops in both hydroponics and gardening.

It eliminates up to 95% of salts, heavy metals and other possible contaminants. Removes up to 99% of chlorine and reduces sediment larger than 5 microns instantly.

To get ultra pure water of 000 PPM, you can use Ref#422111

To achieve optimal water production conditions, you can use Ref#422120.

Mega Grow Benefits

Reverse Osmosis Equipment is designed to minimize water waste to the drain, with a ratio of approximately 2:1 (bad water/good water).

• Eliminates up to 95% of salts in water
• Less water waste than other equipment
• Easy installation indoors and outdoors

Helps stabilize pH, achieves 100% effectiveness of nutrients and fertilizers, and protects organisms. Ideal for organic crops.

Eliminates and/or reduces: salts, heavy metals, chloramines, nitrates, nitrites, chlorine, sediments, soil, oxides, herbicides and pesticides, volatile organic contaminants (chemical contaminants, benzene, oils, trialomethanes, detergents, PCBs).

How many liters per hour are filtered with the Mega Grow 1000?

The Mega Grow offers 40 liters per hour, which means 1,000 liters per day. It is practically distilled water that allows plants to absorb nutrients more easily and generate better production.

Suitable conditions for using the Mega Grow 1000

To ensure optimal operation of this Growmax Water osmosis filter, a water pressure of 4 BAR is required. It is interesting to have a pressure pump, with which you will also be able to reduce the amount of water that goes into the drain.

Water conditions

• Temperature 25ºC
• Pressure: Min. 3 Kg Max. 6 Kg
• Quality (500 TDS ppm)

Other conditions may reduce water production.

Filter changes should be made approximately every 4-6 months or every 8,000 liters of osmosis water produced.

Ref#422111 and its spare parts to add to any reverse osmosis equipment when ultra pure water of 000 ppm is required.

Use with Pump Kit

To get the most out of osmosis, it is recommended to use a Pump Kit, so that the pressure is maintained and you get the performance indicated by the manufacturer. These kits must be placed at the water inlet of the osmosis.

• Ref#422120

For better performance, you can also use a Buoy Kit, so that it sends a signal to the pump when it should stop working when the water reaches a certain level. In this way, spills or excessive watering are avoided.

• Ref#422114

Spare parts

It is recommended to change the filters every 8,000 liters of osmosis water produced. To configure your Mega Grow osmosis you need:

• 2x Ref#422102
• 2x Ref#422106